CLM SERIES (Metric): Light Weight Clinsert is recommended to be used in tight spaces where a higher pull-out strenght is needed.
The Light Weight Clinserts (Metric) product code starts with CLM. The range of these Clinserts is from M2 up to M4, each of these Sizes are available in Standard threads as in fine threads |
.
Standard Type "S"
Part-no |
Thread A Ø A Class 5H |
Drill Part # | Shear Engagement mm² | Countersink tool Part # | G Min, | Tapping Hole Tool Through | Tapping Hole Tool Blind | Hand Installation Tool Part no | |
CLM5X0.8 | M5X0,8 | D0690 | 104,9 | CSK0830 | M8X1,25 | 9,5 | TTM4 | TBM4 | CLTM5 |
CLM6X1.0 | M6X1,0 | D0880 | 177,7 | CSK1040 | M10X1,25 | 11,5 | TTM4.5x0.75 | TBM4.5x0.75 | CLTM6 |
CLM8X1.25 | M8X1,25 | D1080 | 266,7 | CSK1240 | M12X1,25 | 13,5 | TTM5 | TBM5 | CLTM8 |
CLM10X1.5 | M10X1,5 | D1280 | 341,6 | CSK1500 | M14X1,5 | 15,5 | TTM6x0.75 | TBM6x0.75 | CLTM10 |
CLM12X1.75 | M12X1,75 | D1475 | 470,2 | CSK1650 | M16X1,5 | 17,5 | TTM16x1.5 | TBM16x1.5 | CLTM12 |
Locking Type "L" |
|||||||||
CLML5X0.8 | M5X0,8 | D0690 | 83,1 | CSK0830 | M8X1,25 | 9,5 | TTM4 | TBM4 | CLTM5 |
CLML6X1.0 | M6X1,0 | D0880 | 152,7 | CSK1040 | M10X1,25 | 11,5 | TTM4.5x0.75 | TBM4.5x0.75 | CLTM6 |
CLML8X1.25 | M8X1,25 | D1080 | 242,7 | CSK1240 | M12X1,25 | 13,5 | TTM5 | TBM5 | CLTM8 |
CLML10X1.5 | M10X1,5 | D1280 | 316,4 | CSK1500 | M14X1,5 | 15,5 | TTM6x0.75 | TBM6x0.75 | CLTM10 |
CLML12X1.75 | M12X1,75 | D1475 | 441,4 | CSK1650 | M16X1,5 | 17,5 | TTM16x1.5 | TBM16x1.5 | CLTM12 |
Part # A286 are available also for this Series
Part # Industrial grade are available for this series