|
217-077283 |
Locking Mini Insert |
217-077283 is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077283DFL |
Locking Mini Insert |
217-077283DFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077283S |
Locking Mini Insert |
217-077283S is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077283SN |
Locking Mini Insert |
217-077283SN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077284 |
Locking Mini Insert |
217-077284 is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077284DFL |
Locking Mini Insert |
217-077284DFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077284S |
Locking Mini Insert |
217-077284S is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077284SN |
Locking Mini Insert |
217-077284SN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077285 |
Locking Mini Insert |
217-077285 is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077285DFL |
Locking Mini Insert |
217-077285DFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077285S |
Locking Mini Insert |
217-077285S is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077285SN |
Locking Mini Insert |
217-077285SN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077286 |
Locking Mini Insert |
217-077286 is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077286DFL |
Locking Mini Insert |
217-077286DFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077286S |
Locking Mini Insert |
217-077286S is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
217-077286SN |
Locking Mini Insert |
217-077286SN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
CLLL0256J |
Locking Mini Insert |
This CLLL0256J is used in electronic and aerospace applications, where size and strength are critical. This Clinsert may be installed in a sheet as thin as 1,58mm providing protrusion of insert, not ob ectional. This part number is according to Military Specs. |
|
|
CLLL0256JA286 |
Locking Mini Insert |
This CLLL0256JA286 offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. |
|
|
CLLL0256JMD |
Locking Mini Insert |
This part is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated |
|
|
CLLL0440J |
Locking Mini Insert |
This CLLL0440J is used in electronic and aerospace applications, where size and strength are critical. This Clinsert may be installed in a sheet as thin as 1,58mm providing protrusion of insert, not ob ectional. This part number is according to Military Specs. |
|
|
CLLL0440JA286 |
Locking Mini Insert |
This CLLL0440JA286 offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. |
|
|
CLLL0440JMD |
Locking Mini Insert |
This part is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated |
|
|
CLLL0632J |
Locking Mini Insert |
This CLLL0632J is used in electronic and aerospace applications, where size and strength are critical. This Clinsert may be installed in a sheet as thin as 1,58mm providing protrusion of insert, not ob ectional. |
|
|
CLLL0632JA286 |
Locking Mini Insert |
This CLLL0632JA286 offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. |
|
|
CLLL0632JMD |
Locking Mini Insert |
This part is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. |
|
|
CLLL0832J |
Locking Mini Insert |
This CLLL0832J is used in electronic and aerospace applications, where size and strength are critical. This Clinsert may be installed in a sheet as thin as 1,58mm providing protrusion of insert, not ob ectional. This part number is according to Military Specs. |
|
|
CLLL0832JA286 |
Locking Mini Insert |
This CLLL0832JA286 offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. |
|
|
CLLL0832JMD |
Locking Mini Insert |
This part is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated |
|
|
CLLL632J |
Locking Mini Insert |
This Part is used in electronic applications where size and strength are critical. this insert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. This part is according to military spec. |
|
|
CLLL632JA286 |
Locking Mini Insert |
This part offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. |
|
|
CLLL632JMD |
Locking Mini Insert |
This part is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. |
|
|
CLLLL0256JA286 |
Locking Mini Insert |
This part offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. |
|
|
KNCAL0256J |
Locking Mini Insert |
The Keensert KNCAL0256J is used in electronic and aerospace applications where size and strength are critical. this Keensert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0256JMXSY |
Locking Mini Insert |
This KNCAL0256JMXSY is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0256JT |
Locking Mini Insert |
This KNCAL0256JT offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0440J |
Locking Mini Insert |
The Keensert KNCAL0440J is used in electronic and aerospace applications where size and strength are critical. this Keensert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0440JMXSY |
Locking Mini Insert |
This KNCAL0440JMXSY is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0440JT |
Locking Mini Insert |
This KNCAL0440JT offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0832J |
Locking Mini Insert |
The Keensert KNCAL0832J is used in electronic and aerospace applications where size and strength are critical. this Keensert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0832JMXSY |
Locking Mini Insert |
This KNCAL0832JMXSY is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
KNCAL0832JT |
Locking Mini Insert |
This KNCAL0832JT offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
KNCCL0256J |
Locking Mini Insert |
The Keensert KNCCL0256J is used in electronic and aerospace applications where size and strength are critical. this Keensert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
KNCL0632J |
Locking Mini Insert |
The Keensert KNCL0632J is used in electronic and aerospace applications where size and strength are critical. this Keensert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
KNCL0632JMXSY |
Locking Mini Insert |
This KNCL0632JMXSY is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
KNCL0632JT |
Locking Mini Insert |
This KNCL0632JT offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
MS51830-101L |
Locking Mini Insert |
This MS51830-101L Is used in electronic and aerospace applications where size and strength are critical. this insert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
MS51830-101LDFL |
Locking Mini Insert |
This MS51830-101LDFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-101LS |
Locking Mini Insert |
This MS51830-101LS is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-101LSN |
Locking Mini Insert |
This MS51830-101LSN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-102L |
Locking Mini Insert |
This MS51830-102L is used in electronic and aerospace applications where size and strength are critical. This insert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
MS51830-102LDFL |
Locking Mini Insert |
This MS51830-102LDFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-102LS |
Locking Mini Insert |
This MS51830-102LS is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-102LSN |
Locking Mini Insert |
This MS51830-102LSN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-103L |
Locking Mini Insert |
This MS51830-103L is used in electronic and aerospace applications where size and strength are critical. This insert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
MS51830-103LDFL |
Locking Mini Insert |
This MS51830-103LDFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-103LS |
Locking Mini Insert |
This MS51830-103LS is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-103LSN |
Locking Mini Insert |
This MS51830-103LSN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-104L |
Locking Mini Insert |
This MS51830-104L is used in electronic and aerospace applications where size and strength are critical. This insert may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number: |
|
|
MS51830-104LDFL |
Locking Mini Insert |
This MS51830-104LDFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-104LS |
Locking Mini Insert |
This MS51830-104LS is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830-104LSN |
Locking Mini Insert |
This MS51830-104LSN is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830101L |
Locking Mini Insert |
The MS-Spec MS51830101L is recommended to be used in tight spaces where a higher pull-out strenght is needed. We strongly recommend to use the Clinserts part number. We strongly recommend to use the Clinserts part number: |
|
|
MS51830102L |
Locking Mini Insert |
The MS-Spec MS51830102L is recommended to be used in tight spaces where a higher pull-out strenght is needed. We strongly recommend to use the Clinserts part number. We strongly recommend to use the Clinserts part number: |
|
|
MS51830103L |
Locking Mini Insert |
The MS-Spec MS51830103L is recommended to be used in tight spaces where a higher pull-out strenght is needed. We strongly recommend to use the Clinserts part number. We strongly recommend to use the Clinserts part number: |
|
|
MS51830104L |
Locking Mini Insert |
The MS-Spec MS51830104L is recommended to be used in tight spaces where a higher pull-out strenght is needed. We strongly recommend to use the Clinserts part number. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A-101L |
Locking Mini Insert |
This MS51830A-101L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A-101LDFL |
Locking Mini Insert |
This MS51830A-101LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-101LS |
Locking Mini Insert |
This MS51830A-101LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-101LSN |
Locking Mini Insert |
This MS51830A-101LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-102L |
Locking Mini Insert |
This MS51830A-102L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A-102LDFL |
Locking Mini Insert |
This MS51830A-102LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-102LS |
Locking Mini Insert |
This MS51830A-102LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-102LSN |
Locking Mini Insert |
This MS51830A-102LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-103L |
Locking Mini Insert |
This MS51830A-103L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A-103LDFL |
Locking Mini Insert |
This MS51830A-103LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-103LS |
Locking Mini Insert |
This MS51830A-103LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-103LSN |
Locking Mini Insert |
This MS51830A-103LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-104L |
Locking Mini Insert |
This MS51830A-104L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A-104LDFL |
Locking Mini Insert |
This MS51830A-104LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-104LS |
Locking Mini Insert |
This MS51830A-104LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A-104LSN |
Locking Mini Insert |
This MS51830A-104LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830A101L |
Locking Mini Insert |
This MS-Spec MS51830A101L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A102L |
Locking Mini Insert |
This MS-Spec MS51830A102L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A103L |
Locking Mini Insert |
This MS-Spec MS51830A103L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830A104L |
Locking Mini Insert |
This MS-Spec MS51830A104L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51830CA-101L |
Locking Mini Insert |
This MS51830CA-101L offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
MS51830CA-101LDFL |
Locking Mini Insert |
This MS51830CA-101LDFL offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-101LS |
Locking Mini Insert |
This MS51830CA-101LS offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-101LSN |
Locking Mini Insert |
This MS51830CA-101LSN offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-102L |
Locking Mini Insert |
This MS51830CA-102L offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
MS51830CA-102LDFL |
Locking Mini Insert |
This MS51830CA-102LDFL offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-102LS |
Locking Mini Insert |
This MS51830CA-102LS offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-102LSN |
Locking Mini Insert |
This MS51830CA-102LSN offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-103L |
Locking Mini Insert |
This MS51830CA-103L offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
MS51830CA-103LDFL |
Locking Mini Insert |
This MS51830CA-103LDFL offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-103LS |
Locking Mini Insert |
This MS51830CA-103LS offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-103LSN |
Locking Mini Insert |
This MS51830CA-103LSN offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-104L |
Locking Mini Insert |
This MS51830CA-104L offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We strongly recommend to use the Clinserts part number: |
|
|
MS51830CA-104LDFL |
Locking Mini Insert |
This MS51830CA-104LDFL offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51830CA-104LS |
Locking Mini Insert |
This MS51830CA-104LS offers high corrosion resistance and ability to persevere in exposure to different temperatures over time.Temperatures as highs as 700°C and oxidation resistance up to 980°C. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
