Broaching tools are used to pre-broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers.The broaching tool BT516-4 is used to pre-broach the following clinserts:

This includes the locking versions as well as the inserts in different materials.

We recommend purchasing 1 set (=4 blades) extra with the tool: BTSB516

Anemo's ability to ensure the quantity of holes that can be pre-broached is primarily dependent on the hardness of the parent material and the correct utilization of the tool.

This is stock item!

Broaching tools are used to Pre-Broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers. The broaching tool BT516-4 is used to pre-broach the panel where the clinserts need to be installed.

Video showing the use of BT516-4

In the comprehensive video tutorial below, we demonstrate the simplicity and efficiency of utilizing the BT516-4 broaching tool to pre-broach holes in tough materials. This innovative tool is designed to tackle challenging applications with ease, making it an essential addition to your machining toolkit.