This picture does not represent the part number, we will update the picture in the future.
This part is made from Resisteel®
It has been tested to perform 50x better than regular broaching tools in hard materials such as Inconel 718 or Grade 5 Titanium.
Broaching tools are used to pre-broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers.This tool is made from Resisteel® and has a extra coating.The broaching tool BTR453-4 is used to pre-broach the following clinserts:
| CL624J | CL616J |
| CLH524J | CLH518J |
| CLX428J | CLX420J |
| MS51830-204 | MS51830-108 |
| MS51831-203 | MS51831-103 |
| MS51832-202 | MS51832-102 |
This includes the locking versions as well as the inserts in different materials.
We recommend purchasing 1 set (=4 blades) extra with the tool:
BTSBR453
Resisteel® Broaching tools were tested & verified by GE Aerospace: Read more
Anemo isn’t able to ensure the quantity of holes that can be pre-broached, as it’s primarily dependent on the hardness of the parent material and the correct utilization of the tool.
In the comprehensive video tutorial below, we demonstrate the simplicity and efficiency of utilizing the BTR453-4 broaching tool to pre-broach holes in tough materials. This innovative tool is designed to tackle challenging applications with ease, making it an essential addition to your machining toolkit.
Broaching tools are used to pre-broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers. The broaching tool BTR453-4 is used to pre-broach the panel where the clinserts need to be installed.