This is a stock item!
Broaching tools are used to pre-broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers.The broaching tool BT641-4 is used to pre-broach the following clinserts:
| CLH820J | CLH813J |
| CLX720J | CLX714J |
| MS51831-206 | MS51831-106 |
| MS51832-205 | MS51832-105 |
This includes the locking versions as well as the inserts in different materials.
We recommend purchasing 1 set (=4 blades) extra with the tool:
BTSB641
When installing more than 10 inserts we recommend to use the stronger Resisteel® Tool which has been tested to last approximatly 50x longer: BTR641-4
Anemo isn’t able to ensure the quantity of holes that can be pre-broached, as it’s primarily dependent on the hardness of the parent material and the correct utilization of the tool.
In the comprehensive video tutorial below, we demonstrate the simplicity and efficiency of utilizing the BT641-4 broaching tool to pre-broach holes in tough materials. This innovative tool is designed to tackle challenging applications with ease, making it an essential addition to your machining toolkit.
Broaching tools are used to pre-broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers. The broaching tool BT641-4 is used to pre-broach the panel where the clinserts need to be installed.
Customers that have purchased our tools:
