.jpg "BT578-4")
Broaching tools are used to pre-broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers.The broaching tool BT578-4 is used to pre-broach the following clinserts: CL820J CLL820J CL813J CLL813J CLH720J CLHL720J CLH714J CLHL714J CL820 CLL820 CL813 CLL813 CLH720 CLHL720 CLH714 CLHL714
We recommend purchasing 1 set (=4 blades) extra with the tool: BTSB578
Anemo's ability to ensure the quantity of holes that can be pre-broached is primarily dependent on the hardness of the parent material and the correct utilization of the tool.
This is stock item!
Broaching tools are used to Pre-Broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers. The broaching tool BT578-4 is used to pre-broach the panel where the clinserts need to be installed.
In the comprehensive video tutorial below, we demonstrate the simplicity and efficiency of utilizing the BT578-4 broaching tool to pre-broach holes in tough materials. This innovative tool is designed to tackle challenging applications with ease, making it an essential addition to your machining toolkit.
Customers that have purchased our tools:
