MS-Spec

217-077286DFL > Locking Mini Insert


217-077286DFL is used in electronic and aerospace applications where size and strength are critical. It may be installed in sheet material as thin as 1.58mm providing protrusion of insert is not objectional. We strongly recommend to use the Clinserts part number:

Nose Piece:
Pneumatic & Electrical Installation Tool:    
When installing 10 or more use: BTR228-2

Temperature Range:

Dimensions

Material
Dry Film lube
Amount of clins
2
Internal thread
8 - 32" UNCJ-3B
External thread
1/4 - 28" UNF-2A
Shear Engagement
0.0669
Length (L)
0.22
Locking Depth (Z)
0.175



Installation Dimensions

Tap Drill D1
0.228
Countersink D3
0.255
Thread D2
1/4-28
Min. Depth T
0.21



Removal Dimensions

Drill Diameter
0.136
Drill Depth
n/a

Note: This Clinserts ® 217-077286DFL is also available in starter kit with installation tool and refill kit