|
MS51832-201L |
Locking Extra Heavy Insert |
This MS51832-201L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-201LDFL |
Locking Extra Heavy Insert |
This MS51832-201LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-201LS |
Locking Extra Heavy Insert |
This MS51832-201LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-201LSN |
Locking Extra Heavy Insert |
This MS51832-201LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-202L |
Locking Extra Heavy Insert |
This MS51832-202L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-202LDFL |
Locking Extra Heavy Insert |
This MS51832-202LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-202LS |
Locking Extra Heavy Insert |
This MS51832-202LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-202LSN |
Locking Extra Heavy Insert |
This MS51832-202LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-203L |
Locking Extra Heavy Insert |
This MS51832-203L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-203LDFL |
Locking Extra Heavy Insert |
This MS51832-203LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-203LS |
Locking Extra Heavy Insert |
This MS51832-203LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-203LSN |
Locking Extra Heavy Insert |
This MS51832-203LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-204L |
Locking Extra Heavy Insert |
This MS51832-204L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-204LDFL |
Locking Extra Heavy Insert |
This MS51832-204LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-204LS |
Locking Extra Heavy Insert |
This MS51832-204LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-204LSN |
Locking Extra Heavy Insert |
This MS51832-204LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-205L |
Locking Extra Heavy Insert |
This MS51832-205L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-205LDFL |
Locking Extra Heavy Insert |
This MS51832-205LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-205LS |
Locking Extra Heavy Insert |
This MS51832-205LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-205LSN |
Locking Extra Heavy Insert |
This MS51832-205LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-206L |
Locking Extra Heavy Insert |
This MS51832-206L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-206LDFL |
Locking Extra Heavy Insert |
This MS51832-206LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-206LS |
Locking Extra Heavy Insert |
This MS51832-206LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-206LSN |
Locking Extra Heavy Insert |
This MS51832-206LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-207L |
Locking Extra Heavy Insert |
This MS51832-207L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-207LDFL |
Locking Extra Heavy Insert |
This MS51832-207LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-207LS |
Locking Extra Heavy Insert |
This MS51832-207LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-207LSN |
Locking Extra Heavy Insert |
This MS51832-207LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-208L |
Locking Extra Heavy Insert |
This MS51832-208L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-208LDFL |
Locking Extra Heavy Insert |
This MS51832-208LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-208LS |
Locking Extra Heavy Insert |
This MS51832-208LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-208LSN |
Locking Extra Heavy Insert |
This MS51832-208LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-209L |
Locking Extra Heavy Insert |
This MS51832-209L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-209LDFL |
Locking Extra Heavy Insert |
This MS51832-209LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-209LS |
Locking Extra Heavy Insert |
This MS51832-209LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-209LSN |
Locking Extra Heavy Insert |
This MS51832-209LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-210L |
Locking Extra Heavy Insert |
This MS51832-210L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-210LDFL |
Locking Extra Heavy Insert |
This MS51832-210LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-210LS |
Locking Extra Heavy Insert |
This MS51832-210LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-210LSN |
Locking Extra Heavy Insert |
This MS51832-210LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-211L |
Locking Extra Heavy Insert |
This MS51832-211L can be used in most applications. It has an extra thick. Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832-211LDFL |
Locking Extra Heavy Insert |
This MS51832-211LDFL can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-211LS |
Locking Extra Heavy Insert |
This MS51832-211LS can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832-211LSN |
Locking Extra Heavy Insert |
This MS51832-211LSN can be used in most applications. It has a Thick Heavy Duty Threaded Wall to ensure that high pull-out strenghts are obtained. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832101L |
Locking Extra Heavy Insert |
This MS-Spec MS51832101L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832102L |
Locking Extra Heavy Insert |
This MS-Spec MS51832102L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832103L |
Locking Extra Heavy Insert |
This MS-Spec MS51832103L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832104L |
Locking Extra Heavy Insert |
This MS-Spec MS51832104L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832105L |
Locking Extra Heavy Insert |
This MS-Spec MS51832105L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832106L |
Locking Extra Heavy Insert |
This MS-Spec MS51832106L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832107L |
Locking Extra Heavy Insert |
This MS-Spec MS51832107L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832108L |
Locking Extra Heavy Insert |
This MS-Spec MS51832108L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832109L |
Locking Extra Heavy Insert |
This MS-Spec MS51832109L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832110L |
Locking Extra Heavy Insert |
This MS-Spec MS51832110L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832111L |
Locking Extra Heavy Insert |
This MS-Spec MS51832111L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832201L |
Locking Extra Heavy Insert |
This MS-Spec MS51832201L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832202L |
Locking Extra Heavy Insert |
This MS-Spec MS51832202L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832203L |
Locking Extra Heavy Insert |
This MS-Spec MS51832203L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832204L |
Locking Extra Heavy Insert |
This MS-Spec MS51832204L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832205L |
Locking Extra Heavy Insert |
This MS-Spec MS51832205L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832206L |
Locking Extra Heavy Insert |
This MS-Spec MS51832206L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832207L |
Locking Extra Heavy Insert |
This MS-Spec MS51832207L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832208L |
Locking Extra Heavy Insert |
This MS-Spec MS51832208L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832209L |
Locking Extra Heavy Insert |
This MS-Spec MS51832209L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832210L |
Locking Extra Heavy Insert |
This MS-Spec MS51832210L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832211L |
Locking Extra Heavy Insert |
This MS-Spec MS51832211L can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A101L |
Locking Extra Heavy Insert |
This MS51832A101L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A101LDFL |
Locking Extra Heavy Insert |
This MS51832A101LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A101LS |
Locking Extra Heavy Insert |
This MS51832A101LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A101LSN |
Locking Extra Heavy Insert |
This MS51832A101LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A102L |
Locking Extra Heavy Insert |
This MS51832A102L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A102LDFL |
Locking Extra Heavy Insert |
This MS51832A102LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A102LS |
Locking Extra Heavy Insert |
This MS51832A102LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A102LSN |
Locking Extra Heavy Insert |
This MS51832A102LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A103L |
Locking Extra Heavy Insert |
This MS51832A103L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A103LDFL |
Locking Extra Heavy Insert |
This MS51832A103LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A103LS |
Locking Extra Heavy Insert |
This MS51832A103LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A103LSN |
Locking Extra Heavy Insert |
This MS51832A103LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A104L |
Locking Extra Heavy Insert |
This MS51832A104L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A104LDFL |
Locking Extra Heavy Insert |
This MS51832A104LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A104LS |
Locking Extra Heavy Insert |
This MS51832A104LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A104LSN |
Locking Extra Heavy Insert |
This MS51832A104LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A105L |
Locking Extra Heavy Insert |
This MS51832A105L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A105LDFL |
Locking Extra Heavy Insert |
This MS51832A105LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A105LS |
Locking Extra Heavy Insert |
This MS51832A105LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A105LSN |
Locking Extra Heavy Insert |
This MS51832A105LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A106L |
Locking Extra Heavy Insert |
This MS51832A106L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A106LDFL |
Locking Extra Heavy Insert |
This MS51832A106LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A106LS |
Locking Extra Heavy Insert |
This MS51832A106LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A106LSN |
Locking Extra Heavy Insert |
This MS51832A106LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A107L |
Locking Extra Heavy Insert |
This MS51832A107L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A107LDFL |
Locking Extra Heavy Insert |
This MS51832A107LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A107LS |
Locking Extra Heavy Insert |
This MS51832A107LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A107LSN |
Locking Extra Heavy Insert |
This MS51832A107LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A108L |
Locking Extra Heavy Insert |
This MS51832A108L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A108LDFL |
Locking Extra Heavy Insert |
This MS51832A108LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A108LS |
Locking Extra Heavy Insert |
This MS51832A108LS is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A108LSN |
Locking Extra Heavy Insert |
This MS51832A108LSN is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
|
MS51832A109L |
Locking Extra Heavy Insert |
This MS51832A109L is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We strongly recommend to use the Clinserts part number: |
|
|
MS51832A109LDFL |
Locking Extra Heavy Insert |
This MS51832A109LDFL is made of Chrome moly steel which is harder and stronger material then stainless steel, it is also Cadmium plated. We recommend switching to our standard available stainless steel clinsert PN. If you can’t accept the stainless steel alternative, please contact us. |
|
