Installation Tool / Imperial / Heavy
CLHT1210 is a tool that has 2 operations.Insert the clins in the slotted holes, after screwing in the Clinsert, use the dimpled holes of the tool to drive in the Clins. After that lift up and turn the tool to use the flat surface the drive in the remaining height of the clins. It installs the following inserts: CLH1210J CLHL1210J MS51831CA109 MS51831CA109L
This tool CLHT1210 does not install the insert below the surface, for that you need to use the PRO-tool: CLHT1210PRO
If you need to install your inserts in very hard parent material, with hardness greater than 30 HRC, you should also buy the broaching tool: BT1062-4
Precision without compromise: manufactured to tolerances as tight as 0.01 mm / 0.00039 Inch
We respond within 2 hours.
Installation Tool
Imperial
Any questions? FAQ Page