MS-Spec

MS51832207 > Non-Locking Extra Heavy Insert


This MS-Spec MS51832207 can be used in most applications. It has an Extra Thick Heavy Duty Threaded Wall to ensure that very high pull-out strenghts are obtained. We strongly recommend to use the Clinserts part number:

Manual Installation Tool: CLXT918
Alternative Part # : CLX918J   
Nose Piece:
Pneumatic & Electrical Installation Tool:    
Temperature Range :

Dimensions

Material
Stainless Steel
Amount of clins
4
Internal thread
9/16 - 18
External thread
7/8 -14
Shear Engagement
1.3761
Length (L)
0.81
Locking Depth (Z)
n/a



Installation Dimensions

Tap Drill D1
0.828
Countersink D3
0.885
Thread D2
7/8 - 14 UNF
Min. Depth T
0.94



Removal Dimensions

Drill Diameter
25/32
Drill Depth
n/a

Note: This Clinserts ® MS51832207 is also available in starter kit with installation tool and refill kit