CLM SERIES (Metric):

Light Weight Clinserts is recommended to be used in tight spaces where a higher pull-out strenght is needed.

 

The Light Weight Clinserts (Metric) product code starts with CLM.

The range of these Clinserts is from M2 up to M4, each of these Sizes are available in Standard threads as in fine threads

.                                                                 

                                                                                                     Standard Type "S"

Part-no

Thread A Ø A

Class 5H

Drill Part # Shear Engagement mm² Countersink tool Part #   G Min, Tapping Hole Tool Through Tapping Hole Tool Blind Hand Installation Tool Part no
CLM5X0,8 M5X0,8 D0690 104,9 CSK0830 M8X1,25 9,5 TTM4  TBM4  CLTM5
CLM6X1,0 M6X1,0 D0880 177,7 CSK1040 M10X1,25 11,5 TTM4,5x0,75 TBM4,5x0,75 CLTM6
CLM8X1,25 M8X1,25 D1080 266,7 CSK1240 M12X1,25 13,5 TTM5  TBM5  CLTM8
CLM10X1,5 M10X1,5 D1280 341,6 CSK1500 M14X1,5 15,5 TTM6x0,75 TBM6x0,75 CLTM10
CLM12X1,75 M12X1,75 D1475 470,2 CSK1650 M16X1,5 17,5 TTM16x1,5 TBM16x1,5 CLTM12

Locking Type "L"

CLML5X0,8 M5X0,8 D0690 83,1 CSK0830 M8X1,25 9,5 TTM4  TBM4  CLTM5
CLML6X1,0 M6X1,0 D0880 152,7 CSK1040 M10X1,25 11,5 TTM4,5x0,75 TBM4,5x0,75 CLTM6
CLML8X1,25 M8X1,25 D1080 242,7 CSK1240 M12X1,25 13,5 TTM5  TBM5  CLTM8
CLML10X1,5 M10X1,5 D1280 316,4 CSK1500 M14X1,5 15,5 TTM6x0,75 TBM6x0,75 CLTM10
CLML12X1,75 M12X1,75 D1475 441,4 CSK1650 M16X1,5 17,5 TTM16x1,5 TBM16x1,5 CLTM12