CLL Series (Imperial):

Miniature Clinserts are used in Electronic and Aerospace Applications, where the size and the strength  are critical.

Their Pull-Out strength exceeds the tensile strength of most Military Standard Screws.

These Inserts may be installed in a Material Sheet as thin as 1/6", providing protrusion of the insert is not objectionable.

The Mini Clinserts (Imperial) product code starts with CLL.

The range of these Clinserts is from 0 up to 8, each of these sizes are available in standard threads as in fine threads.

 

 

                                                                                                             Standard Type

Part-no Thread A Ø A Class 5H Drill Part  # Shear Engagement mm² Countersink tool Part # Ø F  G Min, Tapping Hole Tool Through Tapping Hole Tool Blind Hand Installation Tool Part no
CLL0256 2-56”UNCJ-3B D0134 0,0157 (10,1) CSK0166 8-32  UNC-2B 0,140(3,56) TTI0134 TBI0134  CLLT02
CLL0440 4-40”UNCJ-3B D0161 0,0302 (19,5) CSK0194 9-32  UNF-2B 0,160(4,06) TTI0161 TBI0161 CLLT04
CLL0632 6-32”UNCJ-3B D0187 0,0329 (21,2) CSK0220 12-28 UNF-2B 0,160(4,06 TTI0187 TBI0187  CLLT06
CLL0832 8-32”UNCJ-3B D0228 0,0669 (43,2) CSK0225 ¼-28  UNF-2B 0,210(5,33) TTI0228 TBI0228 CLLT08

      Locking Type

CLLL0440 4-40”UNCJ-3B D0161 0,0302 (19,5) CSK0194 9-32  UNF-2B 0,160(4,06 TTI0161 TBI0161 CLLT04
CLLL0632 6-32”UNCJ-3B D0187 0,0329 (21,2) CSK0220 12-28 UNF-2B 0,160(4,06 TTI0187 TBI0187 CLLT06
CLLL0832 8-32”UNCJ-3B D0228 0,0669 (43,2) CSK0225 ¼-28  UNF-2B 0,210(5,33) TTI0228 TBI0228 CLLT06
Part # According to Military Specs are available for this Series