inserts: Clinserts miniature CLHM      

CLHM SERIES (Metric):

Heavy Duty Clinserts have a thick, Heavy Duty thread wall. They can be used in most of the applications is recommended to be used in tight spaces where a higher pull-out strenght is needed.

 

The Heavy Duty Clinserts (Metric) product code starts with CLHM.

The range of these Clinserts is from M4 up to M24, each of these Sizes are available in Standard threads as in fine threads.

.                                                                 

                                                                                                     Standard Type "S"

Part-no

Thread A Ø A

Class 5H

Drill Part # Shear Engagement mm² Countersink tool Part #   G Min, Tapping Hole Tool Through Tapping Hole Tool Blind Hand Installation Tool Part no
CLHM4x0,7 M4X0,7 D0690 104,9 CSK0830 M8X1,25 9,5 TTM8 TBM8 CLHTM4
CLHM5X0,8 M5X0,8 D0880 177,7 CSK1040 M10X1,25 12,5 TTM10x1,25 TBM10x1,25 CLHTM5
CLHM6X1,0 M6X1,0 D1080 266,7 CSK1240 M12X1,25 14,5 TTM12x1,25 TBM12x1,25  CLHTM6
CLHM8X1,25 M8X1,25 D1280 341,6 CSK1500 M14X1,5 16,5 TTM14x1,5 TBM14x1,5 CLHTM8
CLHM10X1,5 M10X1,5 D1480 470,2 CSK1650 M16X1,5 18,5 TTM16x1,5 TBM16x1,5 CLHTM10
CLHM12X1,75 M12X1,75 D1680 608.5 CSK1900 M18X1,5 20,5 TTM18x1,5 TBM18x1,5 CLHTM12
CLHM14X2,0 M14X2,0 D1875 770,5 CSK2050 M20X1,5 22,5 TTM20x1,5 TBM20x1,5 CLHTM14
CLHM16X2,0 M16X2,0 D2050 896.8 CSK2300 M22X1,5 24,5 TTM22x1,5 TBM22x1,5 CLHTM16
CLHM18X1,5 M18X1,5 D2250 1084,4 CSK2500 M24X1,5 26,5 TTM24x1,5 TBM24x1,5 CLHTM18
CLHM20X2,5 M20X2,5 D2800 1774,3 CSK3025 M30X2,0 34,5 TTM30x2,0 TBM30x2,0 CLHTM20
CLHM24X3,0 M24X3,0 D3100 2189,4   M33X2,0 37,5 TTM33x2,0 TBM33x2,0 CLHTM24

              Locking Type "L"

CLHML4X0,7 M4X0,7 D0690 83,1 CSK0830 M8X1,25 9,5 TTM8   TBM8 CLHTM4
CLHML5X0,8 M5X0,8 D0880 152,7 CSK1040 M10X1,25 12,5 TTM10x1,25 TBM10x1,25 CLHTM5
CLHML6X1,0 M6X1,0 D1080 242,7 CSK1240 M12X1,25 14,5 TTM12x1,25 TBM12x1,25  CLHTM6
CLHML8X1,25 M8X1,25 D1280 316,4 CSK1500 M14X1,5 16,5 TTM14x1,5 TBM14x1,5 CLHTM8
CLHML10X1,5 M10X1,5 D1480 441,4 CSK1650 M16X1,5 18,5 TTM16x1,5 TBM16x1,5 CLHTM10
CLHML12X1,75 M12X1,75 D1680 561.8 CSK1900 M18X1,5 20,5 TTM18x1,5 TBM18x1,5 CLHTM12
CLHML14X2,0 M14X2,0 D1875 724.4 CSK2050 M20X1,5 22,5 TTM20x1,5 TBM20x1,5 CLHTM14
CLHML16X2,0 M16X2,0 D2050 855.2 CSK2300 M22X1,5 24,5 TTM22x1,5 TBM22x1,5 CLHTM16
CLHML18X1,5 M18X1,5 D2250 1051.5 CSK2500 M24X1,5 26,5 TTM24x1,5 TBM24x1,5 CLHTM18
CLHML20X2,5 M20X2,5 D2800 1736.4 CSK3025 M30X2,0 34,5 TTM30x2,0 TBM30x2,0 CLHTM20
CLHML24X3,0 M24X3,0 D3100 2161.9   M33X2,0 37,5 TTM33x2,0 TBM33x2,0 CLHTM24