 |
CLM SERIES ( I ) - Industrial (Metric): Light Weight Clinserts ( I ) are Industrial parts, Those parts are recommended to be used in tight spaces where a higher pull-out strenght is needed.
The Light Weight Clinserts (Metric) product code starts with CLM. The range of these Clinserts is from M2 up to M4, each of these Sizes are available in Standard threads as in fine threads These part numbers are industrial grade Inserts. |
Standard Type "S"
| Part-no |
Thread A Ø A Class 5H |
Drill Part # | Shear Engagement mm² | Countersink tool Part # | G Min, | Tapping Hole Tool Through | Tapping Hole Tool Blind | Hand Installation Tool Part no | |
| CLM5x0.8I | M5X0,8 | D0690 | 104,9 | CSK0830 | M8X1,25 | 9,5 | TTM4 | TBM4 | CLTM5 |
| CLM6X1.0I | M6X1,0 | D0880 | 177,7 | CSK1040 | M10X1,25 | 11,5 | TTM4.5x0.75 | TBM4.5x0.75 | CLTM6 |
| CLM8X1.25I | M8X1,25 | D1080 | 266,7 | CSK1240 | M12X1,25 | 13,5 | TTM5 | TBM5 | CLTM8 |
| CLM10X1.5I | M10X1,5 | D1280 | 341,6 | CSK1500 | M14X1,5 | 15,5 | TTM6x0.75 | TBM6x0.75 | CLTM10 |
| CLM12X1.75I | M12X1,75 | D1475 | 470,2 | CSK1650 | M16X1,5 | 17,5 | TTM16x1.5 | TBM16x1.5 | CLTM12 |
|
Locking Type "L" |
|||||||||
| CLML5X0.8I | M5X0,8 | D0690 | 83,1 | CSK0830 | M8X1,25 | 9,5 | TTM4 | TBM4 | CLTM5 |
| CLML6X1.0I | M6X1,0 | D0880 | 152,7 | CSK1040 | M10X1,25 | 11,5 | TTM4.5x0.75 | TBM4.5x0.75 | CLTM6 |
| CLML8X1.25I | M8X1,25 | D1080 | 242,7 | CSK1240 | M12X1,25 | 13,5 | TTM5 | TBM5 | CLTM8 |
| CLML10X1.5I | M10X1,5 | D1280 | 316,4 | CSK1500 | M14X1,5 | 15,5 | TTM6x0.75 | TBM6x0.75 | CLTM10 |
| CLML12X1.75I | M12X1,75 | D1475 | 441,4 | CSK1650 | M16X1,5 | 17,5 | TTM16x1.5 | TBM16x1.5 | CLTM12 |