BMT10.8-4

>Clinserts® Broaching Tool



Broaching tools are used to pre-broach holes for very hard materials with a hardness greater than 30 HRC or 300 Vickers. The broaching tool BMT10.8-4 is used to pre-broach the following clinserts: CLM8X1.25 CLML8X1.25 CLHM6X1.0 CLML6X1.0  Anemo can’t guarantee the amount of holes that can be pre broached, Since this is mostly due to hardness of the parent material and proper use of the tool.